i2C C08 Flash Charger No.1 Digital Waveform Ammeter with Charge Detection / Voltage Measurement

Specification:
1. Brand: i2c
2. Product Name: Flash charger No.1
3. Model Number C08
4. Input Voltage: DC 24~30V
5. Output Voltage: 6~20V
6. Type-C CH1-CH4 Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A, 6V-28V 140W
7. USB-A CH1-CH4 Output: 5V/3A, 20V/3.25A
8. Output Power: 600W

Features:
1. Multiple display modes: 4 screens, large screen, waveform screen, free switching and free display, real-time charging status monitoring, and instant detection of abnormal fluctuations
2. When a faulty mobile phone is connected to the device, it can automatically detect the status of the charging device's motherboard. 3. If a short circuit occurs, C08 can automatically identify it and flash to remind you, and the buzzer will sound an alarm. This can help users detect faults in advance
4. When one device is inserted, the channel is automatically lit up. When two devices are inserted, the two screens are automatically jumped, and the waveform of each channel can be viewed separately
5. The series chips usually integrate multiple hardware protections such as over-voltage, over-current, over-temperature, short circuit, etc, to improve product safety
6. Highly integrated controller, Power Management Unit, One charger for multiple uses, 8 devices can share one efficient charging, no more waiting
7. The heat is transferred to the PCB board on the back of the device through the heat sink, and the cooling efficiency is increased by 50%
8. Support PD3.1/PE2.1BC1.2/FCP/SCP/QC3.0/VOOC/Super VOOC and other charging protocols
9. Connect to a regulated power supply and instantly transform it into a waveform current meter. Ideal for smartphone repair, 3C digital device
10. Plug to use, connect to any brand charger, can detect current output power, voltage, and current, can fully load 140 watts of power, supports any private protocol